Saturday, November 19, 2011

Ken Morris's Mini-Drill motor

Ken sent me this e-mail on Nov 19th:
--------------------------------------------
"I used an electric motor from a Beam central vac powerbrush.  To control the speed I used  a router speed control. Motor cost is about $30.00. Mounting is no problem but the speed control is necessary. Ken"

I asked for verification of the drill used on - Micro Drill or Mini Drill.  He replied:

"HI Allen.  RE: drill press motor. The motor fits the mini drill press and is an exact fit. Brackets can be made easily and the shaft is .250. It is a 120 v motor and once again this motor is fitted into the beater head of the Beam central vac.  I use a router speed control to monitor the speed. I have more pictures. Thanks, Ken"


Tuesday, November 8, 2011

More photos of Terry Mayhugh's V-Four

After two years of work it is done and running. A Youtube link shows my second successful run:


I machined the intake and exhaust manifolds from bar stock and finished them to look like cast parts. I also made my own distributor cap. - Terry



Tuesday, September 27, 2011

Jerry McKenzie's Miser

Allen,

Finished up my Miser engine and it runs great.  Attached a couple of pic's, as you will see I made a couple of changes to flywheel and support column since I do not have a rotary table for mill yet.  Think it looks OK anyway.

Ordered plans for a Beamer Engine, so that will keep me busy for awhile.

Cheers,

Jerry


Sunday, September 11, 2011

Dana Hall's V-Twin

Here's an e-mail I received from Dana on Sep 11, 2011.  He did a superb job indeed!

--------------------------------------------------------------------------------

Hi Allen...
Dana Hall here from central Florida...

At the start of this year I purchased Jerry's "V Twin" plans, and just
finished building the engine today... Just about 8 months for me to make this...
Enclosed are 3 images of the engine I thought you might like to see...

Looks like the "Bill" engine is next...




Thursday, April 21, 2011

Steve Sedgall's Farmboy (not quite finished yet)

Here's an e-mail and photos I received from Steve on April 20, 2011

-------------------------------------------------------------------------------------------------

Hi,
     I thought I would share with 2 pictures of my Farm Boy which I have just finished. It has run for about 10 minutes and now it s going to stripped and painted. I am very pleased with the results and it was a joy to work with such detailed and accurate drawings. I am looking forward to deciding on  my next Jerry Howell project.

Kind Regards

Steve Sedgall
UK


-------------------------------

steve,

looks real nice,i am in the process of putting mine together. did you use the spark saver on yours?what are you using for fuel?i assume that on the crank bushing that the flange goes on the inside correct?thanks for the pics i will post mine when done. i have also build jerrys powerhouse and it was easy to build and runs real good. thanks

toolmaker

--------------------------------

Here's another e-mail from Steve:
--------------------------------------------------------------

Hi Allen,
Here is a link to a video of the first time my engine ran. 
http://www.youtube.com/watch?v=YV9yEF8nq2g

Steve Sedgall
Toolmaker ER



Friday, March 25, 2011

Alan Whiter's "Vickie"

Here's an e-mail I received from Alan Whiter on March 25, 2011:

-----------------------------------------------

HI
Have just finished the Vickie Engine but with a small burner flame it would not drive the fan so I added a flue which added the extra heat required, it now runs extremely well and is much admired by all.

I have also ordered the super stirling fan for my next project and hope to eventially construct the Farm boy and Howell V twin engines.

The drawings are exceptional and construction notes excellent.

Regards

Alan Whiter


Friday, March 11, 2011

V-4 Distributor Miter Gear Source

DOES ANYBODY HAVE A SUPPLIER FOR THE 15 TOOTH 48 PITCH MITER GEAR SET FOR THE V-4. THE SUPPLIER WAS SUPPOSED TO BE SMALL PARTS.COM. AS PER THE LATE MR.HOWELL, HOWEVER THEY NO LONGER HANDLE THEM. I CAN'T SEEM TO FIND A SUPPLIER, CAN ANYBODY CLUE ME IN ?       

REGARDS TURTLEHEAD

----------------------------------------

Here's what Jerry recommended to me via email when I asked him that question.

"The Stock Drive gears Part Number A 1B 4-Y48015 will work. I don't
know what the cost is.  

wmberg.com has 72 pitch stainless gears that are more precision,
but they cost $65.00 plus $15.00 shipping.  Part Number M72N-7S

I will probably get these a little later on when I make a 1-1/4" diameter
distributor for the V-Fout because they are far more precision than
the Small Parts or the SDP gears. 

Regards,

Jerry Howell"


 As above he suggests "Stock Drive Products" as a source of the original gears. You should be able to find your local distributor for them from their website.

The 72 pitch gears Jerry mentions are larger in diameter than the originals and are not a direct replacement.
Since I was making the V8, my distributor had to be designed larger in diameter (I chose 1-1/2") else the spark towers would be too close together so I re-designed the whole distributor with a larger tower diameter to accommodate them. Very expensive though, but they provide almost no backlash in the rotor which I guess should result in more accurate timing.

Sage